IMP Santa Fe Wall Panel

Description:

The Metl-Span Santa Fe® insulated metal wall panel has a flat exterior profile with a heavy embossed, stucco texture that mimics the look of a masonry stucco finish. Note: Not intended for exterior walls on cold storage buildings.


SANTA FE® INSULATED METAL WALL PANEL FEATURES:

Exterior Profile:
No profile with heavy stucco texture

Interior Profile:
Mesa nominal 1/8" deep; Light Mesa nominal 1/16" deep

Panel Core:

Foamed-in-place, Non-CFC & zero ODP polyurethane, FM Class 1 approval

Thermal Values:
K-factor, Btu in/ft2 hr. °F @ 75°F (24°C) mean core temperature = 0.140. K-factor, Btu in/ft2 hr. °F @ 40°F (4°C) mean core temperature = 0.126 Module Width:
36", 42"

Panel Thickness:
2", 2 1/2", 3", 4" (2 3/4” thickness also available from Nevada plant)

Panel Lengths:

8'-0" to 40'-0"

Exterior Facings:
Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga.

Interior Facings:
Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga.

Panel Joint:
Offset double tongue and groove with extended metal shelf for positive face fastening

Fastening:
Fastener and Clip concealed in the side joint FM Approved Class 1 with no height restrictions.

Finishes & Colors
A full range of exterior colors & coatings are available for the architectural market. For specific information about our available colors and coatings,visit us online at metlspan.com for a comprehensive selection..

Download:
To view printable version, click here.